Super glue is the one you reach for when the fixing is small, the fit is close and you need it to grab quickly. Gel gives you more control on vertical or awkward work, while liquid will wick into tight joints and hairline cracks. Liquid can run if you are not careful, and thicker grades are less forgiving on very fine gaps.
Gorilla Glue Epoxy - 25ml
Gorilla Glue Epoxy adhesive, 25ml
EVO-Stik Epoxy Two Part Rapid Tube - 2 x 15ml
Two-part rapid epoxy adhesive, 2 x 15ml tubes, bonds in minutes
Mitrepen Rapid Activator & Mitrebond Adhesive - 50g
50g activator pen sets superglue in 10 seconds, equals 3x200ml sprays
Gorilla Super Glue - 15g
Impact-tough super glue for instant repairs, dries in 10-45 seconds.
HV Super Glue - 20g
Everbuild HV Super Glue, 20g high viscosity adhesive.
Gorilla Super Glue Gel - 15g
Gorilla Super Glue Gel 15g, impact-resistant and no-run formula
Hippo Rapid Mitre Mate - 200ml + 50g
Rapid clear high-viscosity adhesive for porous materials
Gorilla Epoxy 6044001 - 25ml
25ml two-part epoxy, dries clear in 5 minutes, permanent and water-resistant.
Araldite Instant Epoxy Adhesive Glue - 24ml
24ml fast-setting clear epoxy adhesive, sets in 90 seconds
Gorilla Glue Superglue - 2 x 3g
Superglue pack of 2 x 3g from Gorilla Glue
Start with the space you’ve got and how the fixing will be used, because that usually decides the bottle before anything else. On a small repair where you need the bond to grab quickly, super glue is the one most trades reach for. If you need more working time or a bit of body, the gel version is usually the better pick. Jobs that get called back are often the ones where the glue did not suit the joint, so check access, gap size and how much adjustment you need before you worry about anything else.
Trade super glue is the one you pick when the fixing is small and you need it to grab fast. The main choice is between liquid and gel.
Liquid super glue suits close-fitting joints. It runs into the gap and leaves less mess. Super glue gel gives you more control on uneven faces and vertical work, but it grabs a bit slower.
Compared with the rest of Adhesives & Glues, this is the fast-bond option. It is not the one for filling or long open time.
Start with the joint and the finish you need, not just the grab time.
Thin liquid suits close-fitting parts where the bond line is tight. It moves fast, so you give up a bit of control.
A gel version is the better call where the surface is uneven or you need the glue to stay put. It will not wick into a fine joint the same way.
For mirror work, step over to Mirror Adhesives. For larger contact area or laminating-type fixes, Contact Adhesives is the more sensible buy.
Once you’ve picked super glue, the next call is what else is going into the fixing around it. If the job needs a cleaner finish or a different bond line, you’ll often move to a mirror adhesive or a contact adhesives spec instead.
Super glue is fine for small, fast repairs. It is not the answer where the fixing area is broad or the load is awkward.
The usual mistake is reaching for the fastest glue when the surrounding material wants a different adhesive altogether. Check that before you open the tube.
















