Drilling
Pick drilling accessories by the hole you need to make, the material you’re going into, and whether the bit has to suit a standard drill or an SDS machine. For most jobs, the choice is between general-purpose drill bits and a more specific option: masonry drill bits for block and brick, hss drill bits for cleaner metal work, wood drill bits where you want a tidier cut, and cobalt drill bits when heat and wear start to matter. A drill bit pack helps when you want the common sizes together, but the wrong layout just leaves you paying for bits you won’t use.
SDS Plus Chisel Set - 3 Piece
3-piece SDS Plus chisel set for light breaking and render removal
Dewalt 100 Piece Drill Drive Set - Mixed 100 Piece
100 piece drill and screwdriver bit set with Toughcase+ storage
SDS Plus Flat Chisel - 40 x 250mm
SDS Plus flat chisel, 40 x 250mm, for machines with roto stop
Glass & Tile Drill Bit - 6 x 60mm
6mm glass & tile drill bit with tungsten carbide tip, 60mm
Bosch Expert Self Cut Speed Wood Drill Bit - 6 Piece Set
6-piece spade drill bit set (13-25mm) for high-speed wood drilling
Mexco Tdxcel Dry Diamond Tile Drill Bit - 6mm
6mm dry diamond tile drill bit with wax lubrication, for porcelain and stone
Minotaur Glass & Tile Drill Bit - 6 x 75mm
6 mm x 75 mm drill bit for glass, ceramics and wall tiles
SDS Plus Masonry Drill Bit - 10.0 x 460mm
10 millimetres x 460 millimetres SDS+ masonry drill bit with tungsten carbide ti…
Glass & Tile Drill Bit - 3 Piece
3-piece glass & tile drill bit set: 5mm, 6mm, 8mm
Bosch SDS Plus Hammer Masonry Drill Bit - 6 x 210mm
6 x 210 millimetres SDS Plus masonry drill bit
For the Trade
You narrow drilling accessories by the substrate first, then the fixing size, because the wrong bit type causes more grief than chasing a nominal diameter. Check whether you are into masonry, timber or metal before you worry about the finish of the hole. A standard drill bit pack suits mixed small jobs and keeps the van simple. Go more specific when the material stays the same and the call-backs matter. If you are moving across different materials in one day, the compromise shows up fast.
Types of Drilling
For most jobs, it comes down to a drill bit pack for mixed work or a single bit for repeat drilling. A pack keeps you moving when the job changes through the day, but you give up some efficiency on the material you use most.
Single drilling bits make more sense when the same hole type keeps coming up. You stay focused on one cut, with less compromise on wear or finish.
If you need to match the bit to the machine, start with a standard twist bit or a more specific option from the drilling accessories range. Power Tool Accessories is the parent hub if you’re cross-checking the wider range.
Selection Factors for Drilling
Start with the material and the hole size you need, then check the fit to the machine before anything else. Most wrong buys come from the basics - wrong chuck or SDS fit, wrong diameter, or a point style that does not suit the substrate. Wood drill bits suit cleaner starts in timber. HSS drill bits are the usual pick for metal because they handle heat and edge wear better.
Cobalt drill bits hold up better on harder work, but they cost more. If you cover mixed jobs, a drill bit pack gives you more reach across the day. When the same fixing comes up again and again, a single bit still makes sense. Keep the drilling accessories matched to the job, not the box.
Finish the Room
Once you’ve picked the drilling accessories, the next call is the anchor, plug or screw that matches the hole you’ve just made. That’s where jobs go wrong. The bit can be right and the fixing still not hold.
If you’re working through mixed substrates, keep the bit choice tight and match the fixing to the base material. A sloppy fit usually shows up as spin, wobble or a call-back.
For repeat work, a drill bit pack is handy. On a single-spec job, you’re usually better with the exact bits you need and the right fixings beside them.
Related searches
Local availability for Drilling
