Pick packaging around what you’re sending, how much protection it needs, and how quickly it has to go out. Light parcels usually only need basic packaging materials and packing tape. Awkward or fragile loads call for stronger packing supplies and more protective packaging, so you are not paying for returns later.
Ryman Flexocare Bubble Wrap - 500mm x 10m
Bubble wrap roll, 500 mm wide, 10 m long, for protective packaging
Bubble Wrap - 750mm x 75m Roll
Clear bubble wrap roll, 750mm wide x 75m long, for protective packaging
12mm x 10M Banding Strap - Black
Black banding strap, 12mm wide x 10m length
Stretch Film Shrinkwrap - 23 micron 400mm x 300m
Clear stretch film shrinkwrap, 23 micron, 400mm x 300m
Light Duty Flat Strap - 1000mm
Simpson light duty flat fixing strap, 1000mm length
ProSolve Plastic Container - 25L
Heavy-duty 25-litre plastic container with screw cap and carry handle
JDC Paints Ltd Pallet Wrap - 400mm x 300m
300-metre roll of clear polyethylene stretch wrap, 400mm wide
Prosolve Bungee Strap - 1000mm Orange
1000mm orange bungee strap with plastic-coated steel hooks, UV resistant
Bubble Wrap - 1000mm x 100m
Transparent bubble wrap roll, 1000mm wide x 100m long
Cotton Parcel No.5 - 85g Natural
85g natural cotton twine for parcels and gardening tasks
Start with the space you’ve got and how the job moves through the day. Tight bench space or a crowded van slows you down before you’ve even started, and bulky packaging materials make that worse. If the item gets handled a few times, protective packaging matters more than shaving a bit off the outer. For straightforward dispatch, you want packing supplies that close cleanly and hold shape. With awkward loads, crush resistance and void fill come first. Finish and extras come after that. Most of the grief comes from the wrong layout, not the tape colour.
At the counter, the first question is usually how much protection the job needs and how tidy the dispatch has to look. Basic packaging supplies suit routine sends where you just need a clean, economical wrap.
Heavier packaging materials make more sense when the load is likely to get knocked about or stacked. Trade packaging is the pick when you want it to hold together under regular site use, though you give up a bit of neatness and sometimes cost.
Industrial packaging is for harsher handling and bulkier goods, but it can be overkill for simple parcel work. If you’re working back through Manual Handling, that’s where the rest of the kit sits around the job.
What you buy usually comes down to how much punishment the load will take and how tidy the dispatch needs to be. For plain repeat sends, lighter packaging materials keep cost down and are quicker to work with.
Once the contents are awkward, sharp-edged or likely to get handled twice, move up to stronger packaging and better protective packaging. That cuts the risk of damage and the cost that follows.
If you’re boxing mixed kit or keeping parts together in the van, Storage Boxes are the next buy. When the issue is moving packed goods rather than sealing them, Dollies & Trolleys matter more than another roll of tape.
Once you’ve picked the packaging, the next call is what protects it in transit and what keeps the job moving at the bench. For fragile or awkward loads, protective packaging is worth the extra spend because it cuts the returns that come from crushed corners and loose fill.
If the contents are regular and you’re just getting parcels out the door, standard packaging materials are usually enough. Where you’re sending mixed kit, storage boxes help more than loose bags because they keep small parts together and save time when you’re picking the next order.








