Drilling
Pick drilling accessories by the hole you need to make, the material you’re going into, and whether the bit has to suit a standard drill or an SDS machine. For most jobs, the choice is between general-purpose drill bits and a more specific option: masonry drill bits for block and brick, hss drill bits for cleaner metal work, wood drill bits where you want a tidier cut, and cobalt drill bits when heat and wear start to matter. A drill bit pack helps when you want the common sizes together, but the wrong layout just leaves you paying for bits you won’t use.
SDS Plus Drill Bit Set - 400mm 3 Piece
3-piece SDS Plus masonry drill bit set, 12mm, 16mm, 24mm x 400mm
Bosch EXPERT Self Cut Speed Spade Bit - 25 x 152mm
Self-feeding spade bit for fast wood drilling, up to 3x faster
SDS Plus Masonry Drill Bit - 8.0 x 260mm
Toolpak SDS+ masonry drill bit 8mm x 260mm with tungsten carbide tip
Mexco Tdxcel Dry Diamond Tile Drill Bit - 7mm
7mm dry diamond tile drill bit with wax lubrication, for porcelain and stone
Minotaur Diamond Tile Drill Bit - 6 x 70mm
6mm diamond tile drill bit with wax-filled centre
SDS Plus Flat Chisel - 20 x 250mm
SDS Plus flat chisel, 20 x 250mm, for machines with roto stop
DeWalt Extreme Impact Rated Flat Wood Drill Bit Set - 9 Piece
9-piece impact rated flat wood drill bit set, 12–32mm, 152mm long
Minotaur Diamond Core Drill Bit Set - 3 Piece
3-piece diamond core drill set for masonry, 38, 52 and 117mm bits
SDS Plus Masonry Drill Bit - 30.0 x 450mm
Toolpak SDS Plus masonry drill bit 30mm x 450mm for fast drilling in concrete an…
Flat Wood Drill Bit Set - 6 Piece
Toolpak 6-piece flat wood drill bit set, 10–25 millimetres, 152 millimetres leng…
For the Trade
You narrow drilling accessories by the substrate first, then the fixing size, because the wrong bit type causes more grief than chasing a nominal diameter. Check whether you are into masonry, timber or metal before you worry about the finish of the hole. A standard drill bit pack suits mixed small jobs and keeps the van simple. Go more specific when the material stays the same and the call-backs matter. If you are moving across different materials in one day, the compromise shows up fast.
Types of Drilling
For most jobs, it comes down to a drill bit pack for mixed work or a single bit for repeat drilling. A pack keeps you moving when the job changes through the day, but you give up some efficiency on the material you use most.
Single drilling bits make more sense when the same hole type keeps coming up. You stay focused on one cut, with less compromise on wear or finish.
If you need to match the bit to the machine, start with a standard twist bit or a more specific option from the drilling accessories range. Power Tool Accessories is the parent hub if you’re cross-checking the wider range.
Selection Factors for Drilling
Start with the material and the hole size you need, then check the fit to the machine before anything else. Most wrong buys come from the basics - wrong chuck or SDS fit, wrong diameter, or a point style that does not suit the substrate. Wood drill bits suit cleaner starts in timber. HSS drill bits are the usual pick for metal because they handle heat and edge wear better.
Cobalt drill bits hold up better on harder work, but they cost more. If you cover mixed jobs, a drill bit pack gives you more reach across the day. When the same fixing comes up again and again, a single bit still makes sense. Keep the drilling accessories matched to the job, not the box.
Finish the Room
Once you’ve picked the drilling accessories, the next call is the anchor, plug or screw that matches the hole you’ve just made. That’s where jobs go wrong. The bit can be right and the fixing still not hold.
If you’re working through mixed substrates, keep the bit choice tight and match the fixing to the base material. A sloppy fit usually shows up as spin, wobble or a call-back.
For repeat work, a drill bit pack is handy. On a single-spec job, you’re usually better with the exact bits you need and the right fixings beside them.
Related searches
Local availability for Drilling
