Safety tape comes down to how much you need to warn off, how long it needs to stay visible, and whether you’re marking a perimeter or a fixed route. Plain barrier tape is usually the quick answer for short-term cordons, while black and yellow hazard tape or floor marking tape makes more sense where the line needs to stay clear and get noticed. Call-backs often start when the tape is too light for the job or the wrong colour for the area, so match the format to the risk, not just the wording on the roll.
Prodec Wet Paint Tape - 60mm x 200m Black Yellow
Non-adhesive black/yellow wet paint tape in dispenser box, 60mm x 200m.
ProSolve PVC Builders Tape - 2" Black/Yellow 24 Pack
Black/yellow PVC builders tape, 51mm x 33m, high-tack and durable
Fixman Barrier Tape - 70mm x 500m Red/white
Red and white barrier tape, 70mm x 500m roll, for marking out hazards.
Aljec Barrier Tape - 70mm x 100m Red & White
70mm x 100m red and white non-adhesive safety barrier tape
ProSolve PVC Builders Tape - 2" Red/White 24 Pack
ProSolve red/white PVC hazard tape, 51mm x 33m, 24 rolls.
Aljec Hazard Tape - 50mm x 33m Red & White
Self-adhesive red and white hazard tape, 50 millimetre x 33 metre
Timco Hazard Tape - 33m x 50mm Yellow & Black
Yellow and black hazard tape, 33m x 50mm.
Faithfull Barrier Tape - 70mm x 500m Red & White
Red & white barrier tape, 70mm x 500m, non-adhesive PVC
Hippo Hazard Warning Tape - 50mm x 33m Yellow/black
Heavy duty hazard warning tape for interior/exterior demarcation, yellow/black, …
Timco Underground Tape Electric Cable - 365m x 150mm
365m x 150mm yellow LDPE warning tape for underground services.
Start with the space you’ve got and how it’ll be used, then the choice gets easier. A tight corridor, warehouse aisle or temporary exclusion zone needs safety tape that reads fast and stays out of the way. If the risk is visual only, lighter barrier tape is usually enough. Where the line has to stand out on busy floors or through mixed traffic, black and yellow hazard tape or floor marking tape makes more sense. The usual mistake is buying on wording alone and ending up with a roll that’s too subtle for the job.
For most jobs, you’re choosing between a plain barrier roll and a more specific trade safety tape. Plain barrier tape suits short-term cordons and quick no-go areas. It’s cheap, light, and easy to run out fast. The trade-off is simple - it doesn’t carry much weight on a busy site.
Black and yellow hazard tape works when the line needs to stand out at a glance and stay clear. Floor marking tape is the better call if the line has to hold up under traffic or repeated cleaning. If you only need a visual warning, the parent Tapes range gives you the broader choice. If the job gets handled or walked over, the tougher format usually saves the call-back.
Start with what the tape has to do on site. Stop access. Mark a route. Keep a floor line visible through traffic.
A lighter safety tape is fine for short-term cordons where the message matters more than the finish. Go heavier on floor marking tape where forklifts, pallets, or repeated footfall would lift a thinner roll.
Black and yellow hazard tape gives a quick read when you want the warning seen at a glance. Red and white suits restrictions that need a more formal look.
If the job is fixing down carpet or a panel, move over to Carpet Tape or Double Sided Tape instead. Wrong tape there is what causes call-backs.
Once you’ve picked the right safety tape, the next call is what the rest of the job needs around it. If you’re setting out a temporary exclusion, you may still need barrier boards, cones or screens to stop people walking straight through the line. Tape on its own gets ignored on busy sites.
For warehouse or yard work, the usual follow-on is floor marking tape where the line needs to stay put, rather than just warn people off for the day. If the area’s being handed back after the works, the finish matters too. A clean edge and the right storage or access arrangement usually save you the next complaint.

















